Imojuli ye-Mylinking™ Optical Transceiver SFP LC-SM 1310nm 10km
I-ML-SFP-SX 1.25Gb/s I-SFP 1310nm 10km LC Imodi Eyodwa
Izici Zomkhiqizo
● Isekela amazinga e-bit angu-1.25Gbps/1.0625Gbps
● Isixhumi se-Duplex LC
● Unyawo lwe-SFP olushelelayo olufakwayo
● Umthumeli we-laser we-FP ongu-1310nm kanye nomtholi wesithombe we-PIN
● Isebenza ekuxhumekeni kwe-SMF okungamakhilomitha ayi-10
● Ukusetshenziswa kwamandla okuphansi,< 0.8W
● Isikhombimsebenzisi Sokuqapha Ukuhlola Idijithali
● Ihambisana ne-SFP MSA kanye ne-SFF-8472
● I-EMI ephansi kakhulu kanye nokuvikelwa okuhle kakhulu kwe-ESD
● Izinga lokushisa lekesi lokusebenza:
Ezentengiselwano: 0 kuya ku-70 °C
Izimboni: -40 kuya ku-85 °C
Izicelo
● I-Gigabit Ethernet
● Isiteshi Sefayibha
● Shintshela ku-Switch interface
● Izinhlelo zokusebenza ze-backplane ezishintshiwe
● Isixhumi esibonakalayo se-router/server
● Ezinye izinhlelo zokudlulisa amehlo
Umdwebo Wokusebenza
Izilinganiso Eziphezulu Kakhulu
| Ipharamitha | Uphawu | Okungenani. | Ubukhulu. | Iyunithi | Inothi |
| I-Voltage Yokunikezela | I-Vcc | -0.5 | 4.0 | V | |
| Izinga Lokushisa Lesitoreji | TS | -40 | 85 | °C | |
| Umswakama Olinganiselwe | RH | 0 | 85 | % |
Qaphela: Ukucindezeleka okungaphezu kwezilinganiso eziphezulu kakhulu kungabangela umonakalo ohlala njalo ku-transceiver.
Izici Zokusebenza Ezijwayelekile
| Ipharamitha | Uphawu | Okungenani. | Uhlobo | Ubukhulu. | Iyunithi | Inothi |
| Izinga Ledatha | DR |
| 1.25 |
| I-Gb/s | |
| I-Voltage Yokunikezela | I-Vcc | 3.13 | 3.3 | 3.47 | V | |
| Ukunikezwa Kwamanje | I-Icc5 |
| 220 | mA | ||
| Izinga lokushisa lekesi lokusebenza. | Tc | 0 | 70 | °C | ||
| TI | -40 | 85 |
Izici Zikagesi (TOP(C) = 0 kuya ku-70 ℃, TOP(I) = -40 kuya ku-85 ℃, VCC = 3.13 kuya ku-3.47 V)
| Ipharamitha | Uphawu | Okungenani. | Uhlobo | Ubukhulu. | Iyunithi | Inothi | |
| Umthumeli | |||||||
| Ukushintshashintsha kokufaka idatha okuhlukile | I-VIN,PP | 120 | 820 | i-mVpp | 1 | ||
| I-Tx Khubaza Okokufaka Okuphezulu | I-VIH | 2.0 | I-Vcc+0.3 | V | |||
| Ukufakwa Kokukhubaza kwe-Tx-Okuphansi | I-VIL | 0 | 0.8 | V | |||
| Umphumela Wephutha Le-Tx-High | I-VOH | 2.0 | I-Vcc+0.3 | V | 2 | ||
| Umphumela Wephutha Le-Tx-Ophansi | I-VOL | 0 | 0.5 | V | 2 | ||
| Ukufakwa komehluko wokufaka | Rin | 100 | Ω | ||||
| Umamukeli | |||||||
| Ukushintshashintsha kokukhipha idatha okuhlukile | Vout,pp | 300 | 650 | 800 | i-mVpp | 3 | |
| Umphumela we-Rx LOS-High | I-VROH | 2.0 | I-Vcc+0.3 | V | 2 | ||
| Umphumela we-Rx LOS-Ophansi | I-VROL | 0 | 0.8 | V | 2 | ||
Amanothi:
1. I-TD+/- i-AC yangaphakathi ehlanganiswe nokuphela komehluko okungu-100Ω ngaphakathi kwemojuli.
2. I-Tx Fault kanye ne-Rx LOS ziyiziphumo eziqoqiwe, okufanele zidonswe phezulu ngama-resistor angu-4.7k kuya ku-10kΩ ebhodini lokusingatha. I-voltage yokudonsa phezulu ephakathi kuka-2.0V kanye ne-Vcc+0.3V.
3. Imiphumela ye-RD+/- ihlanganiswe ngaphakathi kwe-AC, futhi kufanele iqedwe nge-100Ω (umehluko) ku-SERDES yomsebenzisi.
Izici Zokukhanya (TOP(C) = 0 kuya ku-70 ℃, TOP(I) = -40 kuya ku-85 ℃, VCC = 3.13 kuya ku-3.47 V)
| Ipharamitha | Uphawu | Okungenani. | Uhlobo | Ubukhulu. | Iyunithi | Inothi |
| Umthumeli | ||||||
| Ubude beWave yokusebenza | λ | 1290 | 1310 | 1330 | nm | |
| Amandla okukhipha aphakathi (Avuliwe) | I-PAVE | -9 | -3 | i-dBm | 1 | |
| Isilinganiso Sokuphela | ER | 9 |
|
| dB | 1 |
| Ububanzi be-spectral ye-RMS | Δλ | 0.65 | nm | |||
| Isikhathi sokuvuka/sokuwa (20%~80%) | I-Tr/Tf | 0.26 | ns | 2 | ||
| Isijeziso sokuhlakazeka | I-TDP | 3.9 | dB | |||
| Iso Elibonakalayo Eliphumayo | Ihambisana ne-IEEE802.3 z (ukuphepha kwe-aser yekilasi 1) | |||||
| Umamukeli | ||||||
| Ubude beWave yokusebenza | λ |
| 1310 |
| nm | |
| Ukuzwela Komamukeli | I-PSEN1 | -22 | i-dBm | 3 | ||
| Ukulayisha ngokweqile | I-PAVE | 0 |
| i-dBm | 3 | |
| Isiqinisekiso se-LOS | Pa | -35 | i-dBm | |||
| I-LOS De-assert | Pd | -24 | i-dBm | |||
| I-LOS Hysteresis | I-Pd-Pa | 0.5 |
| dB | ||
Amanothi:
1. Kukalwe ku-1.25Gb/s nge-PRBS 2 223 – 1Iphethini yokuhlola ye-NRZ.
2. Akuhlungiwe, kulinganiswa nge-PRBS223 – 1iphethini yokuhlola @1.25Gbps
3. Kukalwe ku-1.25Gb/s nge-PRBS 223 – 1Iphethini yokuhlola ye-NRZ ye-BER < 1x10-12
Izincazelo ze-Pin kanye nemisebenzi
| Iphinikhodi | Uphawu | Igama/Incazelo | Amanothi |
| 1 | I-VeeT | Inhlabathi ye-Tx |
|
| 2 | Iphutha le-Tx | Isibonakaliso sephutha le-Tx, Umphumela Wokuqoqa Ovulekile, "H" esebenzayo | 1 |
| 3 | Ukukhubaza kwe-Tx | Okokufaka kwe-LVTTL, ukudonswa kwangaphakathi, i-Tx ikhutshaziwe ku-“H” | 2 |
| 4 | I-MOD-DEF2 | Ukufakwa/ukuphuma kwedatha yesixhumi esibonakalayo esinocingo olu-2 (i-SDA) | 3 |
| 5 | I-MOD-DEF1 | Okokufaka kwewashi le-interface ye-serial yezintambo ezimbili (i-SCL) | 3 |
| 6 | I-MOD-DEF0 | Isibonakaliso samanje semodeli | 3 |
| 7 | Ukukhetha isilinganiso | Akukho ukuxhumana |
|
| 8 | I-LOS | Ukulahleka kwesignali ye-Rx, Ukuphuma Komqoqi Ovulekile, "H" esebenzayo | 4 |
| 9 | I-VeeR | Iphansi le-Rx |
|
| 10 | I-VeeR | Iphansi le-Rx |
|
| 11 | I-VeeR | Iphansi le-Rx |
|
| 12 | RD- | Idatha etholiwe ngokuphambene iphumile | 5 |
| 13 | RD+ | Idatha itholiwe | 5 |
| 14 | I-VeeR | Iphansi le-Rx |
|
| 15 | I-VccR | Ukunikezwa kwamandla kwe-Rx |
|
| 16 | I-VccT | Ukunikezwa kwamandla kwe-Tx |
|
| 17 | I-VeeT | Inhlabathi ye-Tx |
|
| 18 | I-TD+ | Dlulisa idatha ku- | 6 |
| 19 | I-TD- | Ukudlulisa idatha okuphambene ku | 6 |
| 20 | I-VeeT | Inhlabathi ye-Tx |
Amanothi:
1. Uma iphezulu, lokhu kukhishwa kubonisa iphutha le-laser lohlobo oluthile. Okuphansi kubonisa ukusebenza okuvamile. Futhi kufanele kudonswe phezulu nge-resistor engu-4.7 - 10KΩ ebhodini lokusingatha.
2. I-TX disable iyi-input esetshenziselwa ukuvala i-transmitter optical output. Idonswa ngaphakathi kwe-module nge-resistor engu-4.7 - 10KΩ. Izimo zayo yilezi:
Okuphansi (0 – 0.8V): I-Transmitter ivuliwe (>0.8, < 2.0V): Akucacisiwe
Okuphezulu (2.0V~Vcc+0.3V): I-Transmitter Ikhutshaziwe Ivuliwe: I-Transmitter Ikhutshaziwe
3. I-Mod-Def 0,1,2. Lezi yizikhonkwane zencazelo yemojuli. Kufanele zidonswe phezulu nge-resistor engu-4.7K – 10KΩ ebhodini lokusingatha. I-voltage yokudonsa kufanele ibe phakathi kuka-2.0V ~ Vcc + 0.3V.
I-Mod-Def 0 isekelwe yi-module ukukhombisa ukuthi i-module ikhona
I-Mod-Def 1 iwumugqa wewashi wesixhumi esibonakalayo se-serial esinezintambo ezimbili se-serial ID
I-Mod-Def 2 iwumugqa wedatha wesixhumi esibonakalayo se-serial esinezintambo ezimbili se-serial ID
4. Uma iphezulu, lokhu kukhishwa kubonisa ukulahleka kwesiginali (LOS). Okuphansi kubonisa ukusebenza okuvamile.
5. RD+/-: Lezi yiziphumelo ze-differential receiver. Ziyimigqa ye-differential engu-100Ω ehlanganiswe yi-AC okufanele iqedwe nge-100Ω (differential) ku-SERDES yomsebenzisi. Ukuhlanganiswa kwe-AC kwenziwa ngaphakathi kwe-module ngakho-ke akudingeki ebhodini le-host.
6. TD+/-: Lezi yizinto zokufaka ze-differential transmitter. Ziyimigqa ye-differential ehlanganiswe yi-AC, enokuphela kwe-differential okungu-100Ω ngaphakathi kwe-module. Ukuhlanganiswa kwe-AC kwenziwa ngaphakathi kwe-module ngakho-ke akudingeki ebhodini le-host.
Imininingwane Yokuxilonga Yedijithali
Ama-transceivers angasetshenziswa ezinhlelweni zokusingatha ezidinga ukuxilongwa kwedijithali okulinganisiwe ngaphakathi noma ngaphandle.
| Ipharamitha | Uphawu | Amayunithi | Okungenani. | Ubukhulu. | Ukunemba | Inothi |
| Izinga lokushisa le-transceiver | I-DTemp-E | ºC | -45 | +90 | ±5ºC | 1 |
| I-voltage yokunikezwa kwe-Transceiver | I-DVoltage | V | 2.8 | 4.0 | ±3% |
|
| Ukukhetha kwamanje kwe-Transmitter | Ama-DBia | mA | 2 | 15 | ±10% | 2 |
| Amandla okukhipha okudlulisela | Amandla e-DTx | i-dBm | -10 | -2 | ±3dB | |
| Amandla okufaka aphakathi nendawo omamukeli | Amandla e-DRx | i-dBm | -25 | 0 | ±3dB |
Amanothi:
1. Uma izinga lokushisa lokusebenza = 0~70 ºC, ububanzi buzoba min=-5, Max=+75
2. Ukunemba komsinga we-Tx bias kungu-10% wamanje wangempela kusukela kumshayeli we-laser kuya ku-laser
3. Ukulinganisa Kwangaphakathi/Kwangaphandle kuyahambisana.
Isekethe Ejwayelekile Yesixhumi Esibonakalayo
Ubukhulu bephakheji
